Activeforever Aero Pilates Pro XP557 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Activeforever Aero Pilates Pro XP557에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Activeforever Aero Pilates Pro XP557 17 페이지. Aero pilates

ASSEMBLY INSTRUCTIONS

STEP 9

Insert the PULLEY POST(39) into the REAR WOODEN PLATFORM(14) and secure with SOCKET

BOLT(M10x1.5x35mm)(61). Insert the PULLEY SETS(41) through the PULLEY SPACERS(42) and the

PULLEY POST(39) and secure with ADJUSTMENT KNOBS(43) and ARC WASHERS(M8)(76).

STEP 10

Screw the two FOAM PADS(37) into the CARRIAGE(26).

STEP 11

The FOOTBAR(17) and the CARDIO REBOUNDER(49) cannot be used at the same time. For cardio

workouts, install the CARDIO REBOUNDER(49) and for Pilates workouts, install the FOOTBAR(17).

To install the FOOTBAR(17), insert the FOOTBAR(17) into the LEFT and RIGHT FOOTBAR SUPPORTS

(15, 16) and slide down until BUTTON PINS(19) lock into position.

To remove the FOOTBAR(17), grasp the FOOTBAR(17) on both sides close to the FOOTBAR

SUPPORTS(15, 16). Press the BUTTON PINS(19) at the same time, pull up, and remove.

Refer to the inset drawing. To install the CARDIO REBOUNDER(49), insert the CARDIO REBOUNDER

(49) posts into the holes in the FRONT WOODEN PLATFORM(3).

BUTTON

PIN(19)