Activeforever Conversion II 9003 소유자 매뉴얼 - 페이지 4
{카테고리_이름} Activeforever Conversion II 9003에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Activeforever Conversion II 9003 20 페이지. Conversion ii 9003 trainers
페이지 인쇄HARDWARE IDENTIFICATION CHART
This chart is provided to help identify the hardware used in the assembly process. Place the washers, the
end of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check the
length of the bolts and screws.
3/16"
1/4"
0
1/2
1
0
10
20
30
6
8
NOTICE: The length of all bolts and screws except those with flat heads is
measured from below the head to the end of the bolt or screw.
Flat head bolts and screws are measured from the top of the
head to the end of the bolt or screw.
After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.
5/16"
3/8"
1/2
2
1/2
3
40
50
60
70
80
10
12
Part No. and Description
81
Bolt, Socket Head (M8 x 1.25 x 70mm)
89
Lock Washer (M8)
94
Bolt, Button Head (M8 x 1.25 x 15mm)
114
Bolt, Button Head (M8 x 1.25 x 12mm)
95
Bolt, Hex Head (M6 x 1 x 15mm)
96
Bolt, Hex Head (M6 x 1 x 30mm)
97
Bolt, Hex Head (M8 x 1.25 x 16mm)
101
Bolt, Hex Head (M10 x 1.5 x 85mm)
102
Bolt, Hex Head (M10 x 1.5 x 95mm)
103
Bolt, Hex Head (M10 x 1.5 x 125mm)
105
Nylock Nut (M10 x 1.5)
109
Large Washer (M8 x ø23 )
1/2"
INCHES
1/2
4
1/2
90
100 110 120 130 140 150
MILLIMETERS
5
5
1/2
6
in.
mm.
length
length
Qty
2
2
3
4
4
4
4
1
1
1
3
2