Dynalabs DYN-PM-100 제품 설명서 - 페이지 4
{카테고리_이름} Dynalabs DYN-PM-100에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynalabs DYN-PM-100 13 페이지. 100 n pm shaker
페이지 인쇄All rights reserved. Reproduction or issue to third parties in any form whatsoever is not permitted without written authority from the proprietors.
1) Introduction
The DYN-PM-100 is designed to p rovide dynamic force excitation for
vibration and shock testing of small sized mechanical structures.
The DYN-PM-100 is a compact, lightweight and powerful general purpose
electrodynamic shaker with an integrated amplifier providing up to 100 N
peak sine force.
2) General Information
2.1) Unpacking and Inspection
Dynalabs products provide adequate protection for undamaged products to be
transported. Document the damages that occur indirectly during the transport
and contact the customer representative. Check all components of the shaker.
If there is a defect, please contact us.
2.2) System Components
The DYN-PM-100 has the following components:
-Electrodynamic Shaker
-Power Adapter
-Signal Cable
-M6X10 Stainless Bolt
-R 1/4 Pneumatic Union
- Product Manual
2.3) Theory of Operation
DYN-PM-100 is an electro-magnetic actuator. Electro-magnetic actuators
are basically voice coils consisting of a permanent magnet and coil. The
moving element can be the coil or the magnet depending on the design
requirements. The moving element is usually suspended by an elastic
membrane.
4