GReddy Intercooler Kit 사용 설명서 - 페이지 4

{카테고리_이름} GReddy Intercooler Kit에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GReddy Intercooler Kit 9 페이지. For toyota mr-2 turbo (sw-20)
GReddy Intercooler Kit에 대해서도 마찬가지입니다: 설치 매뉴얼 (7 페이지), 설치 매뉴얼 (9 페이지), 설치 매뉴얼 (9 페이지), 설치 매뉴얼 (13 페이지)

GReddy Intercooler Kit 사용 설명서
2. Removal of Stock & Turbo Kit Parts
When removing the stock parts, make sure you read over the factory
repair manual for proper procedures.
2-1 Disconnect the negative side of the battery.
2-2 Remove the undercover, and the front bumper.
2-3 Remove the bumper support beam.
2-4 Remove the two horns.
2-5 Remove the wind shield washer tank.
2-6 Remove the Turbo Kit Air intake, suction pipe, the suction adapter, and the restictor.
(refer to the Turbo Kit Installation Manual)
2-7 Remove the Turbo Kit Compression Pipe C-2, and C-3.
(refer to the Turbo Kit Installation Manual)

3. Kit Installation

3-1 Body Modification
Cut the shaded area of the body at the left front
body as shown.
Intercooler Installation
(1) Install the Intercooler bracket to the body with
the horn as shown using the provided spacer
between the horn bracket and I/C bracket.
(Parts used #: 17, 18, 21)
Spacer