Dynalabs DYN-P-4200 제품 설명서 - 페이지 4

{카테고리_이름} Dynalabs DYN-P-4200에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynalabs DYN-P-4200 8 페이지.

All rights reserved. Reproduction or issue to third parties in any form whatsoever is not permitted without written authority from the proprietors.

1) Introduction

The piezoresistive accelerometers are based on micro-electro-mechanical systems
(MEMS) technology. Piezoresistive accelerometers are used for high impact
applications in automotive industry such as crash testing. 4000 Series Dynalabs
uniaxial accelerometers feature a wide frequency range up to 5,000 Hz and
excellent shock resistance up to 10,000g. 4000 series accelerometers are
lightweight. They have reliable aluminum housing with IP68 protection class.
These sensors have integrated cable with configurable length and connection
options.
DYN-P-4000 sensors offer the following options;
• Custom Cable Length (5m standard cable)
• Custom Housing Material
• Custom Connector
• Base plate

2) General Information

2.1) Unpacking and Inspection

Dynalabs products provide adequate protection for undamaged products to be
transported. Document the damages that occur indirectly during the transport
and contact the customer representative.

2.2) System Components

The DYN-P-4000 has the following components:
- MEMS Sensor
- Calibration Certificate
- Product Manual
4