GReddy TYPE-RS BRS-313 CT9A 사용 설명서 - 페이지 6
{카테고리_이름} GReddy TYPE-RS BRS-313 CT9A에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. GReddy TYPE-RS BRS-313 CT9A 8 페이지. Rs-type adapter kit
Install the adaptor pipe using factory air
(6)
hose and connect the 22Φ side of tube
into the air control valve hose.
Please install using factory hose band.
※
Connect the ‹№4›6φ vacuum hose to
(7)
the air tube that was connected on
vacuum hose (factory air bypass valve) and
connect the other end to the top cover
part of the Blow Off Valve (6φ union).
Make sure that the 6 φ vacuum hose
※
goes under the radiator upper hose and it
does not interrupt radiator fan or exhaust
manifold.
Please use the ‹№5›zip tie to hold it.
Paste the ‹№7›emblem on the top cover.
(8)
Install and connect the battery back.
(9)
Place back the air duct.
If the air duct may interfere the adaptor
※
pipe, please adjust the adaptor pipe's
position
Air Control Valve Hose
6-
-
Air Hose
‹№4›