Agrimate AM-K26708 운영자 지침서 - 페이지 9

{카테고리_이름} Agrimate AM-K26708에 대한 운영자 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. Agrimate AM-K26708 12 페이지.

PUMP MAINTENANCE

Oil- To check the oil level, remove the

protective rubber cushion (Fig 21) by

removing the screws. Change oil firstly after

30 operating hours, then every 100 operating.

1- Unscrew plug (Fig 22-C) and drain oil.

Replace and tighten drain plug.

2- Unscrew breather cap (Fig 20) of the

oil tank and fill with 120cc of SAE 40 or

20/50 engine oil.

Grease nipples-Apply with grease at each

grease nipple (Fig 23-E)

Warning: Screw in the grease nipple two

turns every 2 operating hours.

Valve- To remove the valve (Fig 24-F), for

cleaning, remove the screws (Fig24-G) and

valve cap. Remove any residue from the

valve cap. Change the valve spring (fig 24-

L) if broken or worn.

If the valve looses pressure:

1- Fit a new valve if the pressure

regulator (Fig 24-M) or the valve

seat (Fig 24-N) is worn.

2- Remove any residue from the valve

seat.

3- Renew the oil seals if worn.

Nozzles – Replace the nozzles if broken or if

the y loose pressure (Fig 25).

High pressure hose- Replace the high

pressure hose (Fig 26-K) if broken or worn.