HID OMNIKEY 5127 설치 매뉴얼 - 페이지 3
{카테고리_이름} HID OMNIKEY 5127에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HID OMNIKEY 5127 4 페이지.
HID OMNIKEY 5127에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지)
페이지 인쇄
Installation Guide
Specifications and Installation
For further information, contact HID support:
For driver setup, consult the OMNIKEY Smart Card User Guide
(http://www.hidglobal.com/documents/ok3121_userguide_ins_en.pdf).
CAUTION: Install the drivers prior to attaching the OMNIKEY reader with the computer.
USB Connected Reader Specifications
Operating Temperature
PC Connector Cable
Meantime between Failure (MTBF)
Host Interface
Host Data Transmission Speed
Power Supply
USB Connected Reader Installation
1. Connect the reader with your computer; plug the USB connector into your
computers USB port.
2. When the reader is operational, the LED illuminates.
3. For contactless operation, hold the card next to the reader logo. For contact
smart cards, insert the card into the reader with contacts facing up.
4. When the reader is exchanging data with a card (reading/writing), the LED blinks.
PCMCIA and ExpressCard Reader Specifications
Operating Temperature
Meantime between Failure (MTBF)
Host Interface
Host Data Transmission Speed
Power Supply
PCMCIA and ExpressCard Reader Installation
1. Insert the reader into the compatible interface slot of your Notebook or mobile
device.
2. If the reader is operational, observe the reader in your operating system's Device
Manager.
3. For contactless operation, hold the card next to the logo on the reader. For
contact smart cards, insert the card into the reader with contacts facing up.
© 2010 – 2011 HID Global Corporation - All rights reserved.
®
OMNIKEY
Smart Card Reader
.
http://support.hidglobal.com/
0°-55°C / 32°-131°F
180 cm / 70.9 in
(150 cm / 59,1 in - Models 1021 & 3021)
500,000 Hours
USB 2.0 CCID (USB 1.1 Compatible)
12 Mbps (USB 2.0 Full Speed)
Bus Powered
4321
4121 CL
0°-55°C / 32°-131°F
500,000 Hours
ExpressCard
ExpressCard
54 mm
34mm
12 Mbps
Bus Powered
4040
PCMCIA
16 Mbps
PCMCIA
3