Automation Direct D0-05AD 시작하기 - 페이지 8

{카테고리_이름} Automation Direct D0-05AD에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Automation Direct D0-05AD 13 페이지.

Chapter 1: Getting Started

Step 3: Connect the Power Wiring

Connect the power input wiring for the DL05. Observe all precautions stated earlier in this

manual. For more details on wiring, see Chapter 2 on Installation, Wiring, and Specifications.

When the wiring is complete, close the connector covers. Do not apply power at this time.

110/220 VAC Power Input

L GN

95 - 240 VAC

Step 4: Connect the Programming Device

Most programmers will use DirectSOFT programming software, installed on a personal

computer. Or, you may need the portability of the Handheld Programmer. Both devices will

connect to COM port 1 of the DL05 via the appropriate cable.

1-8

DL05 Micro PLC User Manual, 6th Edition, Rev. E

X0 - X7: Input

Y0 - Y5: Output

Use cable part #

D2–DSCBL

(cable comes with HPP)

For replacement

cable, use part #

DV–1000CBL

12/24 VDC Power Input

12-24 VDC

20 W max

X0 - X7: Input

Y0 - Y5: Output