Celestron 21045 빠른 설정 매뉴얼 - 페이지 2

{카테고리_이름} Celestron 21045에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Celestron 21045 2 페이지. Powerseeker series
Celestron 21045에 대해서도 마찬가지입니다: 사용 설명서 (10 페이지), 사양 (4 페이지), 브로셔 및 사양 (4 페이지), 사양 (2 페이지), 빠른 설정 매뉴얼 (2 페이지), 빠른 설정 매뉴얼 (2 페이지)

페이지 인쇄

Quick Set-up Guide [cont]

Locate the counterweight bar and

counterweight. Slide the counterweight half

way down the counterweight bar and tighten

the locking screw to secure in place.

The longer cable should attach to the Right

Ascension axis and the shorter cable attaches

to the Declination axis -- tighten set screw to

secure in place.

Reattach both wingnuts and tighten to secure

in place. The focuser end of the telescope

should be over the counterweight assembly.

Loosen the set screw on the focuser so that it

does not obstruct the inner diameter of the

focuser. Remove the plastic cap covering the

end of the focuser.

For additional magnification, you can use the

included 3x barlow. Place the barlow in the

focuser in place of the eyepiece - remove the

cap from the barlow.

Thread the threaded end of the counterweight

bar into the Dec axis of the equatorial mount.

Before mounting the tube, remove the two

wingnuts on the tube rings.

Locate the finderscope and remove plastic

caps on front and back of lens. Remove the

knurled nuts on the threaded posts at the

focuser end of the telescope tube.

Insert the chrome barrel of the 20mm eyepiece

into the focuser and tighten the set screw.

Place the eyepiece into the barlow and tighten

the set screw to secure in place.

Slide the chrome end of the slow motion

control cables onto equatorial mount gear shaft

and tighten set screw to secure in place.

Place the tube on the mount by lining up the

screws with the mounting holes on the mount.

Orient the finderscope so that the glass

window is facing towards the front of the tube.

Place finderscope over the posts on the tube

and tighten it down with the knurled nuts.

Remove the lens cap from the front of the

telescope. To observe, look through the

eyepiece as shown above.

For detailed usage

information please

consult your owner's

manual.