Dynalink 56USBPRO 빠른 설정 매뉴얼 - 페이지 6

{카테고리_이름} Dynalink 56USBPRO에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynalink 56USBPRO 7 페이지. 56k usb pro modem

56K USB PRO Modem Quick Set-up Guide

Windows does not detect the modem.

Check the modem's USB cable is connected to both your modem and USB

port of your PC.

Verify your PC is USB ready. A program which can do this for you is available

for download from our website (www.dynalink.co.nz).

Verify your PC's BIOS has USB IRQ enabled. This is an advanced procedure,

so please contact your computer dealer or check your PC's manual for

instructions.

When clicking the More Info (or Query modem) button, an error is reported.

Check you have clicked on the COM port your modem is attached to.

Ensure no other programmes are using the modem - exit all programmes

before running More Info.

A list of ATI responses are reported, but some of them report ERROR.

This is normal - not all AT commands are supported by all modems.

ERROR is reported after typing at&f

Check you are typing at&f - it is normal not to see these characters when first

entered. Try quitting out of Hyperterminal and starting again.