HID Fargo DTC5500LMX 청소 키트 지침 - 페이지 8

{카테고리_이름} HID Fargo DTC5500LMX에 대한 청소 키트 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. HID Fargo DTC5500LMX 16 페이지.

DTC5500LMX Card Printer Cleaning Kit Instruction, PLT-02707, Rev. 1.1

2.3 Cleaning the Platen and Card Feed Rollers using the Adhesive Cleaning Card

Perform this procedure approximately every 1000 prints to maintain a consistent print quality.

Note: The Card Feed Rollers move the card throughout the print process. Rollers should be kept

clean to prevent card jams and card contamination. This cleaning process will ultimately lead to

better print quality and extended Printhead life.

Open the Printer's Front Cover, remove the Print Ribbon and close the Front Cover.

2. Remove all the cards from the Printer's Input Hopper.

3. Use the Cleaning Card from the Printer's cleaning kit and remove the adhesive backing

from both sides of the card.

IMPORTANT NOTE: If your Printer has a Magnetic Encoder installed, be sure to leave

the small Liner Strip on top of the Cleaning Card in place.

Note: This small strip is needed to protect the Magnetic Head from the adhesives on the

Cleaning Card.

March 2016

Page 8 of 16