Celestron 22028 사용 설명서 - 페이지 5

{카테고리_이름} Celestron 22028에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Celestron 22028 12 페이지. Up to 40x magnification full-height tripod with altazimuth mount
Celestron 22028에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (8 페이지)

페이지 인쇄

SETTING UP THE TRIPOD

1. The tripod comes preassembled. Start by spreading the legs

outward. At this point, the tripod will measure 16" tall. You can

use the tripod in this position on a tabletop or extend the legs

further for additional height.

2. To extend the tripod legs to your desired height, unlock the tripod

leg clamps at the bottom of each leg (Fig. 4) and pull down.

Close the leg clamp to secure each leg. When all three legs are

fully extended, the tripod will look like Fig. 5 and measure about

42" in height.

3. For an additional boost in height, you can raise the central

column at the top of the tripod. To do this, turn the central

column locking knob (Fig. 6) counterclockwise until it is loose.

Pull up on the head of the tripod until you reach your desired

height. Then tighten the locking knob. The maximum height of

the tripod is 49".

Fig. 3

Fig. 4

Fig. 5

Fig. 6

ENGLISH