HID FARGO HDP5000 사용자 설명서 - 페이지 16

{카테고리_이름} HID FARGO HDP5000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HID FARGO HDP5000 20 페이지. High definition card printer/encoder

3.1.2

Selecting the Card Type

From the Card Type dropdown list, select the desired Card Type according to the composition of

the card stock.

Step

Procedure

You have these selections (to choose from) Normal print mode:

•

Fargo UltraCard III (Default Card Type) = 175 and 2.0 sec.

•

Fargo UltraCard Premium = 185˚ and 2.0 sec

•

Fargo Ultracard = 175˚and 2.0 sec

•

HID Tech Card Composite = 190˚ and 2.0 sec

•

HID Tech Card PVC =185˚and 2.0 sec

•

Indala FlexISO – Standard (FPISO) = 185˚and 2.0 sec

•

Indala FLexISO XT-Composite (FPIXT) 190˚ and 2.0 sec

•

Custom 1 = 175˚and 2.0 sec

•

Custom 2 = 175˚and 2.0 sec

Defaults: The Printer Driver software has default Transfer Temperature and Dwell Time settings

that deliver the best transfer for these card types. These defaults automatically configure based

on the card type, Ribbon type and whether printing single- or dual-sided.

Card Type Selection: Before printing, if using these standard Fargo card types, ensure

selecting the appropriate card type from the Card tab of the Printer Driver.

Proper Settings: Not all card types are accommodated by these default settings. In some

cases, experimentation is required to find the proper settings.

IMPORTANT:

used during the image transfer process resulting in poor adhesion of the InTM Film or card

warping.

Page 16 of 103

HDP5000 & HDPii Card Printer Encoder User Guide_L000950, 2.0

If you select the wrong option, the wrong Dwell Time and temperature may be

December 2012