HID HDPii Plus 사용자 설명서 - 페이지 17

{카테고리_이름} HID HDPii Plus에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HID HDPii Plus 20 페이지. High definition card printer/encoder

페이지 인쇄

HDP5000 & HDPii Card Printer Encoder User Guide_L000950, 2.0

Step

Procedure

If using a card stock other than listed, use the Custom 1 options to save custom Dwell Time and

dwell temperature controls on the Image Transfer tab.

Click Custom options and enter a name for the card stock.

Click Image Transfer tab to adjust the Dwell Time and temperature sliders to the

appropriate settings (see next page). Note: These settings will be saved for the custom

card type when the Printer Driver setup window is closed.

Custom Card stock: To determine the proper settings for custom card stock, apply

the Tape Adhesion Test. See Section 6.1.2 Conducting the Tape Adhesion Test.

3.1.3

Setting the Orientation

Select either the Portrait or Landscape radio buttons for Orientation.

Step

Procedure

Select Portrait to cause the card to print in a vertical orientation.

Select Landscape to cause the card to print in a horizontal orientation.

3.1.4

Card Hopper Selection

Specifies which hopper the printer feeds a card. Selecting Hopper Top allows the printer to feed

from the top hopper. Selecting Hopper Bottom allows the printer to feed from the bottom hopper.

First available feeds a card from the last successful hopper location first, and then switches to the

other hopper.

3.1.5

Specifying the Number of Copies

Specifies the number of copies to be printed

The upper limit is 10000 and the lower limit is 1.

3.1.6

Selecting the Diagnostics button

Click Diagnostics to launch the WorkBench Printer Utility.

3.1.7

Printing a Test Print Image

Click Test Print to test the printer.

Step

Procedure

Install a compatible ribbon in the Printer for the Test Print.

Open the Driver settings.

From your computer's startup menu, select Settings > Printers and Faxes.

Double-click the Printer under the Printer's window.

Select Printing Preferences under the Printer drop-down menu. Note: This brings up

the Printing Preferences window.

Select the Card tab, and then click Test Print.

When selecting the Test Print button, an image is copied to the Printer.

3.1.8

Selecting About

Select About to open a dialog box containing the Copyright, Driver Version and Date.

December 2012

Page 17 of 103