Automation Direct PS12-075D 설치 지침
{카테고리_이름} Automation Direct PS12-075D에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Automation Direct PS12-075D 4 페이지. Industrial power supply
페이지 인쇄AC-Input
Part Number
Voltage Range
PS12-050D
93 – 264VAC
Universal Input
PS24-050D
PS12-075D
115VAC/230VAC
PS24-075D
selectable
PS24-150D **
93 – 132VAC
187 – 264VAC
PS24-300D **
50 / 60Hz
PS24-600D
115VAC
PS24-500D
93 – 132VAC
*
Adjustable by potentiometer with a screwdriver.
** For CE compliance to EN 61000-3-2 (PFHC: Power Factor Harmonic Current) use on 115VAC or with a transformer providing
isolation from the public power mains)
Operating temperature range:
Natural Air Convection Cooling
Output Power Derating:
Storage temperature range:
Connections:
Case material:
Input current:
@ Vin=115VAC
Ø
PSxx-050D
1.2A typ.
Ø
PSxx-075D
1.7A typ.
Ø
PS24-150D
3.0A typ.
Ø
PS24-300D
5.4A typ.
Ø
PS24-500D
9.5A typ.
Ø
PS24-600D
10.5A typ.
To Install:
1. Read and follow Safety and Installation Instructions on the back of this page.
2. Hook top of power supply's DIN rail clip on DIN rail.
3. Use Screwdriver to extend lower portion of DIN rail clip.
4. Rotate power supply into DIN rail and release lower portion of clip.
5. Verify the DIN rail clip is securely fastened on DIN rail.
6. Connect wires as indicated on power supply.
http:// www.automationdirect.com
INSTALLATION INSTRUCTIONS
PS Series Industrial Power Supply
Output Power
max.
12.0VDC / 3.5A
50 Watt
24.0VDC / 2.0A
12.0VDC / 6.0A
75 Watt
24.0VDC / 3.0A
150 Watt
24.0VDC / 6.0A
300 Watt
24.0VDC / 12.0A
600 Watt
24.0VDC / 24.0A
500 Watt
24.0VDC / 20.0A
-25°C - +70°C max
-13°F - +158°F max
above +50°C (122°F) è 2
-25°C – +85°C m ax
-13°F – +185°F max
Plugable screw type terminal COMBICON.
2
22-10 AWG (0.5-6.0mm
) wire
Recommended tightening torque 0.5 to 0.7Nm (4.5 to 6.2lb.in.)
Use all terminals.
Use a screwdriver with 0.1378 (3.5 mm) blade width (Automationdirect.com
Aluminium (chassis) and Zinc -plated steel (cover)
@ Vin=230VAC
0.7A typ.
0.9A typ.
1.7A typ.
3.3A typ.
N/A
6.4A typ.
* Output Voltage
Output
Adjustment Range
12.0 – 14.0VDC
24.0 – 28.0VDC
12.0 – 14.0VDC
24.0 – 28.0VDC
24.0 – 28.0VDC
24.0 – 28.0VDC
24.0 – 28.0VDC
24.0 – 28.0VDC
Free Space Requirements: Top and Bottom: 3.15 in (80 mm)
Both Sides: 1.97in (50mm)
%
/
Ambient air temperature measured
°C
0.39in (10mm) below power supply
Power Consumption
Ø
PSxx-050D
Ø
PSxx-075D
Ø
PS24-150D
Ø
PS24-300D
Ø
PS24-500D
Ø
PS24-600D
Recommended Circuit
Breaker (Characteristic C)
5A
10A
16A
20A
™
part DN-SS3).
@ Vin=115VAC
@ Vin=230VAC
62 Watt typ.
60 Watt typ.
87 Watt typ.
86 Watt typ.
168 Watt typ.
165 Watt typ.
338 Watt typ.
330 Watt typ.
545 Watt typ.
N/A
660 Watt typ.
652 Watt typ.
Rev: 08/03