ADEMCO LYNX 시스템 매뉴얼 - 페이지 4

{카테고리_이름} ADEMCO LYNX에 대한 시스템 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADEMCO LYNX 14 페이지.
ADEMCO LYNX에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 빠른 시작 매뉴얼 (8 페이지)

Ademco Lynx System Manual

1. Enter your [security code] and press [AWAY].

2. The keypad will beep twice, or continuously if the exit warning has been programmed for your

system, and will display the armed Away message. The red Armed indicator will light and the system

will announce "armed Away-exit now."

Arming the System with No Delay

Use No Delay with Stay mode when you are staying home and do not expect anyone to use the entrance

door. Use No Delay with Away mode when the premises will be vacant for extended periods of time such

as vacations, etc.

When armed with No Delay, the system will sound an alarm if a protected door or window is opened,

including the entrance door. You may leave through the entrance door during the exit delay period

without causing an alarm, but an alarm will sound as soon as someone reenters.

To arm with No Delay, enter your [security code] and Away or Stay and No Delay.

Disarming

To disarm the system and silence the burglary alarm:

1. Enter [security code] and press the [OFF] button.

2. The Ready light will light (if no alarms have occurred while armed) and the keypad will keep once to

confirm that the system is disarmed.

EXIT/ENTRY DELAY

Your Ademco Lynx provides a delay after entering or exiting your home before the system is alarmed.

Zones (also called partitions) are areas that can be bypassed when arming the system. This could be ideal

for those who want to arm all but one door/window.

Bypassing Protection Zones

Bypassing zones allows you to arm your system with one or more zones intentionally unprotected. The

system must be disarmed before arming. Fire zones cannot be bypassed.

To bypass a zone:

1. Enter your [security code] + [BYPASS] and enter the 2 digit zone number. Important! All single-digit

numbers must be preceded by a zero (for example, enter [02] for zone 2).

2. The keypad will display the word "Bypass" along with each bypassed zone number. Wait for these

http://alpha.adt.com/help/261[11/14/2018 8:02:22 PM]