808 canz plus SP888 빠른 시작 매뉴얼

{카테고리_이름} 808 canz plus SP888에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 808 canz plus SP888 2 페이지.

페이지 인쇄

Getting to know Bluetooth

Step 1: Unpack

Bluetooth wireless is a quick and easy way to connect a

Make sure the following items came in this package.

smartphone to a speaker or a headset. There are basically

• Your speaker

two steps to making Bluetooth work.

"Hi. I'm a

"Hi phone.

Step 2: Charge your speaker

phone."

I'm a speaker."

PAIRING:

The two devices get

to know each other.

Before you start using the Canz Plus speaker for the first

time, it's a good idea to charge it completely.

PAIR

To charge the speaker: Plug the included

CONNECTING:

The two devices

USB cable into the DC IN jack on the back

do something together (like play

of the speaker.

music).

Plug the other end of the USB charging

PAIR

cable into a power source, like a computer

or a USB charging adapter.

This guide takes you through the steps to get started.

The CHARGE indicator on the back of the

speaker is red while the speaker is charging. It

LINE IN

turns off when the speaker is fully charged.

Note: You can use the speaker while it's charging.

• USB charging cable

Step 3: Turn on

Press and hold the

button on

the front of the speaker. The

power up tone sounds and the

Speaker back

PAIR indicator starts blinking.

After a few seconds, the speaker

LINE IN

DC IN

CHARGE

goes to Bluetooth pairing mode

to set up with your smartphone.

Step 4: Pair + Connect

DC IN

CHARGE

Enable Bluetooth on your smartphone or

other device.

Make sure the PAIR indicator on the

front of the speaker is blinking rapidly.

(If it isn't, give a short double-press on

the

button. The speaker gives an audio

PAIR

signal.)

PAIR

If you've previously paired your phone or other Bluetooth device with this speaker,

the speaker will automatically attempt to reconnect to that device when you

switch the speaker on. If you want to pair to a new device, give a short double-

PAIR

press to the

button. The speaker gives a signal and the button starts blinking.

Choose 808 CANZ PLUS from the pairing options on your

Bluetooth Wireless Connection Tips

smartphone. (If it's not in the list, choose "Scan" from your

• Make sure the Bluetooth capability of your device is turned on.

phone's Bluetooth menu.)

• Make sure there's nothing plugged into the speaker's LINE

The speaker gives an audio signal when it's finished pairing and

IN jack when you're trying to use Bluetooth.

connecting to your smartphone. The PAIR button on the front

• The Bluetooth wireless connection works up to a range of

of the speaker turns solid blue.

roughly 33 feet (10 meters). This range may vary, however,

Note: The process of enabling Bluetooth and connecting varies from device

based on other factors, such as room layout, wall material,

to device. See your device's owners manual for more information and specific

instructions.

obstacles, your device's Bluetooth performance, etc. If you're

having problems connecting to this speaker, move closer to it.

• If your device asks you for a password to connect, use "0000".

• If you've paired your device with the speaker before but you're

having trouble reconnecting when you turn the speaker back

on, give a short press to the button while the PAIR indicator

is flashing. The speaker will attempt to connect to a previously

paired device.