Gainbridge GT3012 설치 매뉴얼 - 페이지 11
{카테고리_이름} Gainbridge GT3012에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gainbridge GT3012 12 페이지. Magnetic &portable gps tracker
페이지 인쇄
15. Branding Settings
Send a command enable you to use your own brand in the reply text message. It is default as Null
This is a factory command. Only manufacturer is able to send this command.
SMS:
*brd*XXX*
(XXX refers to the new brand name)
Device Response:
16. Command Setting List
Function
APN Setting
Master Setting
Password Changing
Vibration Sensitivity
Setting
Alert Setting
LLC Query
Address Query
Google Map Search
Routetrack Setting
Routetrack Sampling
Routrack Upload
Routetrack Off
Check Function
Setting
"XXX inform: The new brand name is set."
SMS Command
*apn*AXXX*BXXX*CXXX*
*master*123456*+1XXXXXXX* +1 refers to the country code.
*password*654321*
*sensitive*1-5*
*callalert*
*smsalert*
*alertoff*
*locate*
*locateaddress*
*locatemap*
*routetrack*1-99*
*rsampling*1-999*
*rupload*60-999*
*routetrackoff*
*check*0-99*
*checkm*10-99*
This command sets the telecom
Access Point Name. BXXX refers to
user name, CXXX refers to password.
XXXXXXXX is the cell phone number.
Please make sure country code is
included, and 0 is not needed before
cell phone number
Original password is default as 123456.
654321 refers to new password.
1 being the most sensitive, 5 the least.
Default setting is 1.
Call alert will call master number 2 times
when motion is detected after 3 minutes
non-movement.
SMS notification will sent to master
number when motion is detected after 2
minutes non-movement.
End Call/SMS alert
Latest information of latitude, longitude,
date, time and ranking.
Address information of current location.
Google Map link with current location.
1-98 represents hours of accumulated
data, 99 means always on.
1-999 represents seconds of data
collecting
seconds.
60-999 represents seconds of data
uploading
seconds, minimum rate should not be
less than 60.
End routetrack function.
0-99 represents hours of data upload
interval, default as *check*0*
10-99 represents
upload interval
11 / 12
Description
interval,
default
interval,
default
minutes
of
as
10
as
60
data