Gainbridge GT3088 사용 설명서 - 페이지 14
{카테고리_이름} Gainbridge GT3088에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gainbridge GT3088 17 페이지. Magnetic & portable gps tracker with
페이지 인쇄
13. Status query
SMS:
*status*
System Health and status check. Returns text message indicating various system diagnostics
14. Multi Controller
This allows any SMS enabled cell device to query the unit for location, status, etc.
SMS:
*multiquery*
"Multi query feature enabled."
SMS:
*multiqueryoff*
The unit will now only respond to the Master controller.
Device Response: to the Master Controller:
15. Device Information
SMS:
*about*
You will receive a text message include software edition information and device's serial number.
16. Branding Settings
Send a command enable you to use your own brand in the reply text message. It is default as Null.
This is a factory command.
SMS:
*brd*XXX*
(XXX refers to the new brand name)
Device Response:
17. Power Bank
17.1 Features
a. Capacity: 8800mAh
b. Mini USB input, USB-A output. It can support charging tablet, cellphone, PDA, MP3, MP4, digital
camera etc.
c. Low and high voltage protection.
d. DC-DC efficiency 89-95%
e. LED indication light indicates power capacity as follows:
1light < 25% , 2lights <50% , 3lights<75% , 4lights<100%
17.2 Power Bank Operation
a. Connect device with DC5V via the mini USB cable and LED indication light will show the power
capacity and device will start being charged.
b. Connect the USB-A slot of the device with output cable provided, then press and hold the power
on button for 1.5 second, and device will start charging other device. LED indication light will show
the power capacity.
c. LED indication light will be off for power saving, turn the power on (Button for 1.5 seconds) to turn
on the light again.
d. 1 Led indication light flash indicates low power, the device needs to be recharged.
"XXX inform: The new brand name is set."
"Multi query feature disabled."
14 / 17