Gainbridge GT3088 사용 설명서 - 페이지 9

{카테고리_이름} Gainbridge GT3088에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gainbridge GT3088 17 페이지. Magnetic & portable gps tracker with

order to view the location through cellphone browser. It is suitable for smart phone user only. * Note:

Device will start positioning once it is powered on, location data will be saved and retained in

memory every minute automatically. If GPS positioning fails, the nearest GSM cell tower data will

be saved instead.

9. Remote Listening

The device is equipped with an audio DSP, enabling master controller to monitor the surrounding

sounds via "call". The Master Controller activates the Listening function either by calling the device

or commanding the device to call back via SMS.

9.1 SMS:

*callin*

This command enables the Master controller to call the device to start listening within 30mins after

the SMS is sent.

9.2 SMS:

*callback*

The device will call the master controller enabling the Maser Controller to listen when the call is

accepted.

The GT3088 is purchased with an account on the http://gps.gaintrace.com/ website. Tracking

data, per the default and variable settings is transmitted via GPRS to the server where it is viewable

from ANY web browser, where the user has unlimited access to the full suite of reports and data

displayed on Google Maps.

Tracking Website Login ID: Master controller phone number. It's the same number as 6.2.

Tracking Website Login Password: Default as 123456. For new password please see 6.3 for details.

For example:

If your master controller no. is +55 12345678

Then your login account would be 005512345678

Default Password: 123456

Recommended Web browsers are Chrome, Firefox or Cellphone default browser.

There are different tracking modes that can be selected by SMS command. Route Track and

Interval Track.

NOTE: The default setting is OFF due to GPRS data and extra power is required for each tracking

mode.

This function delivers a highly granular tracking record of a specific route.

Initiate the start with a SMS command. 10 second locate records are uploaded every 1 minute to

the server during periods of motion detected by the internal vibration sensor.

This function is suitable for speed moving object tracking.

Press On button at the back of the device to turn on routetrack function, LED flashes 5 times

9 / 17