Gainlab Audio DICTATOR GLA-TC1 캘리브레이션 매뉴얼 - 페이지 15

{카테고리_이름} Gainlab Audio DICTATOR GLA-TC1에 대한 캘리브레이션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gainlab Audio DICTATOR GLA-TC1 18 페이지.

Switch to UNLINK.

Adjust: VR5

Measure: -3dBu on the left output

Error margin: +-0.1dBu

Adjust: VR6

Measure: -3dBu on the right output

Error margin: +-0.1dBu

Now keep watching the outputs and switch back and forward between LINK and UNLINK mode. If

there is a difference in the output signal which is greater than 0.1dBu then repeat the 5.3 step.

STEP – GR CALIBRATION

Starting point: Mode- HiComp, UNLINK, Threshold -9dB, meter - Reduction

Input signal: +0dBU 1kHz sine wave