Gainlab Audio GLA-TC2 캘리브레이션 매뉴얼 - 페이지 2

{카테고리_이름} Gainlab Audio GLA-TC2에 대한 캘리브레이션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gainlab Audio GLA-TC2 18 페이지.
Gainlab Audio GLA-TC2에 대해서도 마찬가지입니다: 매뉴얼 (13 페이지)

페이지 인쇄
Gainlab Audio GLA-TC2 캘리브레이션 매뉴얼
EACH ELEMENT OF THE PROCEDURE THAT WE DESCRIBED IN THIS DOCUMENT
ASSUMES A USER WITH PROFESSIONAL QUALIFICATIONS OR EQUIVALENT
KNOWLEDGE. IF YOU DON'T HAVE NECCESSARY KNOWLEDGE TO CARRY OUT ALL
OF THE OPERATIONS PROPERLY, PLEASE DO NOT ATTEMPT ANY MODIFICATIONS
INSIDE THE DEVICE, AS YOU MAY BE EXPOSED TO THE RISK OF ELECTRIC SHOCK
OR DAMAGE OF THE EQUIPMENT.
GAINLAB AUDIO WILL NOT BE REIALBLE FOR ANY PERSONAL INJURY
REQUIED TOOLS
Rt
1.
For disassembly:
For trimming:
2.
Signal generator or other signal source with a maximum
output power of + 12dBu.
3.
DC voltage meter, with expected accuracy:
minimum 4 1⁄2 digit ± (1% +2)
4.
A device for measuring the root mean square
(RMS) value of AC voltage.
5.
Audio analyzer recommended.
WARNING!
RESULTING FROM IMPROPER HANDLING!
2mm Allen key (hex key)
screwdriver and 2.5mm Allen key (hex key)
screwdriver.
2-3mm flat head screwdriver.