Automation Dr. Nix QNix 5500 빠른 시작 매뉴얼 - 페이지 9

{카테고리_이름} Automation Dr. Nix QNix 5500에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Automation Dr. Nix QNix 5500 12 페이지.
Automation Dr. Nix QNix 5500에 대해서도 마찬가지입니다: 운영 매뉴얼 (20 페이지), 운영 매뉴얼 (16 페이지)

페이지 인쇄

3.2 Insert Probe (Option)

On devices with replaceable probe (grey probe latch), insert the probe as follows:

Remove the probe holder or probe cable from the probe input

•

To unlock, turn the probe input anti-clockwise. The arrow on the probe holder shows the

open padlock on the probe input.

•

Pull the probe holder from the input.

Insert the probe in the probe holder

•

Push the probe into the probe holder using a slight turn/push movement. The arrow on the

probe and on the probe holder must align. When aligned correctly, all 4 lugs will lock into the

respective groove on the probe.

•

Reinsert the probe holder or plug the probe into the cable and screw it in place.

•

To lock the probe put it in place, turn clockwise until it locks. The arrow on the probe holder

points at the locked padlock on the probe input.