Celestron ASTRO FI 22201 사용 설명서 - 페이지 4
{카테고리_이름} Celestron ASTRO FI 22201에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Celestron ASTRO FI 22201 12 페이지. 90 mm refractor/102 mm maksutov/130 mm newtonian
PREREQUISITES
Your Astro Fi Telescope requires one of the following power sources:
• 8 x AA batteries
• 12 volt DC source with at least 1 ampere of current
• Celestron PowerTank (Sold Separately)
You will also need a smartphone or tablet to operate the telescope. Compatible devices include Apple iPhone or
iPad with iOS 6 or later, and Samsung smartphones or tablets with Android 4.0. Visit celestron.com for a complete
compatibility list.
Before you begin, you'll need to install the free Celestron SkyPortal app on your device. Download the app from the App
Store or Google Play.
ASSEMBLING YOUR TELESCOPE
You won't need tools to assemble the Astro Fi Telescope. Remove all the items from their packaging, then:
1. Open the tripod until the center brace is fully extended (Figure 2).
2. Thread the captive center bolt into the accessory tray (Figure 3).
3. Place the fork arm assembly on the tripod and secure it using the captive knob under the top of the tripod (Figure 4).
4. Attach the telescope optical tube by positioning the dovetail into the dovetail holder on the fork arm. Make sure the
bottom of the dovetail is fl at against the dovetail holder. Firmly tighten the thumb bolt. (Figure 5).
5. Adjust the tripod to a comfortable height and level it, using the lock knobs to secure each of the tripod legs.
6. Install eight AA batteries (not included) into the battery pack, noting the correct position for + and -. Leave the
battery pack in the accessory tray.
NOTE:
The accessory tray has a special holder suitable for your smartphone or small tablet.
Fig. 4
Fig. 3
Fig. 2
4
| ENGLISH
A s t r o F i T E L E S C OP E
Fig. 5