Gainsborough H286 조립 지침/사용 지침 - 페이지 2
{카테고리_이름} Gainsborough H286에 대한 조립 지침/사용 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Gainsborough H286 3 페이지. Solar fountain of youth
페이지 인쇄Solar Fountain of Youth
Please read and retain these instructions for future reference
Parts
NOTE: In order to verify that the button is correctly in the " ON " position, cover the solar panel with your
hand and light should turn "ON" automatically.
Care and Maintenance Recommendations
1. Clean solar panel with a soft sponge every couple of weeks.
2. Make sure all connectors are still tight and no water getting in.
3. Keep the water clean during the summer keep topping up every 3 or 4 days with clean water.
4. Clean any pipes every month stop any build-up of algae which could put an extra pressure on your
pump.
5. Take out any foreign body around the pump and keep clean solar product.
6. Always make sure there is enough water for the pump to work otherwise you could damage the pump.
7. Make sure you clean the pump on a regularly bases when you are cleaning face the solar panel face
down on a towel this will stop the pump running or switch it off.
8. During the winter if you can bring it inside and give a good clean ready for next year.
BATTERIES
•
Keep batteries away from children and pets.
•
Do not mix used and new batteries.
•
Remove the batteries if left for long periods.
•
Never dispose of batteries in a fire.
•
Battery disposal, spent or expired batteries must be properly disposed of and recycled in compliance
with local regulations. For detailed information, contact your local authority.
•
Follow the battery manufacturer's safety, usage, and disposal instructions.
H286
CHARGING AND OPERATION:
1. Remove part F. First connect C to F and D to
E. Part D has a small protective shell, which
is tightened to protect the connection point.
2. Pass the wire of part B through hole G to
connect part A. Part A has a protective shell
to screw it on the connection point. Then
carefully put the F part back in place.
3. Finally, there is a switch on the back of the
solar panel, place the button in the "ON"
position for charging by placing it in direct
sunlight for at least 8 hours.
4. The light will work automatically. It will
charge in directly sunlight during the day
and illuminate at night.
Instructions for Use
v001: 28/10/20