dB CNX 사용자 설명서 - 페이지 3
{카테고리_이름} dB CNX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dB CNX 9 페이지. Interface panel
페이지 인쇄
Maintenance Panel Overview:
The CNX Maintenance Interface Panel (MIP) is a custom made, rack mounted unit with
the ability to break out most interfaces available on the Honeywell CNX-200 (-20)
Router. The unit fits into a standard 19" rack with a 2RU height.
User's Manual Applicability:
Unit Hardware Version
Version 3
Equipment Part Numbers:
Description
CNX-200 MIP
Physical Specifications:
Satcom Direct Router Maintenance Interface Panel
Part Number:
Dimensions:
Power:
Interfaces and Power:
The CNX Maintenance Interface Panel communicates with the CNX-200 Router via
three CPC connectors on the back side with custom made harnesses. Connections to a
PC are established through either the DB9 female connectors or the provided RJ45
jacks, depending on communication type. It gets powered by a built-in 24VDC power
supply capable of driving 5 amps.
Console Connections:
The Maintenance Interface Panel incorporates 2ea. DB9 connectors labeled "EXPAND"
and "ROUTER" to interface a PC to the CNX-200's maintenance and Expand consoles.
CNX MAINTENANCE INTERFACE PANEL USER'S MANUAL
Unit Software Version
Version 1.2
Part Number
DB10-200-01
Physical Specifications
DB10-1100-01
19" wide x 3.70" tall x 9.50" deep
120-240VAC (50-60 HZ)
Version 2.0
Page 3