dB CNX 사용자 설명서 - 페이지 8

{카테고리_이름} dB CNX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dB CNX 9 페이지. Interface panel

Powering On/Off The Panel and CNX-200 Router:

Plug the Maintenance Interface Panel into a 110-220VAC (50-60Hz) power source.

Initiate power by pressing the "PWR" button located at the top, right hand side of the

panel face. Once turned on, the CNX-200 router's 24VDC power can now be toggled by

pressing the "CNX" button.

The Maintenance Interface Panel has three buttons to control the CNX-200 router's

WiFi, soft reset, and factory reset discretes. The CNX-200 can be controlled by using

the following buttons:

The "WIFI" button toggles the CNX-200 router's wireless discrete. When indicated as

"ON" and illuminated blue, pins J2-3 and J2-8 are open. When indicated as "OFF" and

illuminated red, these pins are shorted together. By default, the unit powers up with

these pins open (wireless on).

The "FACTORY RESET" button activates the CNX-200 router's factory reset discrete.

When pressed and held, it will illuminate blue and short pins J2-2 and J2-8 together.

The "SOFT RESET" button activates the CNX-200 router's reset discrete. When

pressed and held, it will illuminate blue and short pins J2-1 and J2-7 together.

CNX MAINTENANCE INTERFACE PANEL USER'S MANUAL

Version 2.0

Page 8