808 SP880BL 사용자 설명서
{카테고리_이름} 808 SP880BL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 808 SP880BL 2 페이지.
v2.0 (1.0.2.0) (EN/E/F)
BC
Product registration
Thank you for purchasing an Acoustic Research product. We pride ourselves on the quality and reliability of all our electronic products, but if
you ever need service or have a question our customer service staff stands ready to help. Contact us at www.808headphones.com. PURCHASE
REGISTRATION: Registering Online will allow us to contact you in the unlikely event a safety notifi cation is required under the Federal Consumer Safety Act. Register
Online at: WWW.808HEADPHONES.COM. Click on Product Registration and Fill Out the Brief Questionnaire.
Enregisregistro del productotrement du produit
Gracias por comprar un producto Acoustic Research. Nos enorgullece la calidad y fi abilidad de todos nuestros productos electrónicos, pero si alguna vez
necesita servicios técnicos o si tiene alguna pregunta nuestro personal de atención al cliente está a su disposición para ayudarle. Comuníquese con nosotros en
www.808headphones.com. REGISTRO DE COMPRA: El registro en línea nos permitirá comunicarnos con usted en el caso de tener que enviarle algún aviso de
seguridad en virtud de la Ley Federal de Seguridad del Consumidor. Registre el producto en línea en: WWW.808HEADPHONES.COM. Haga clic en Registro del
producto y responda al cuestionario.
Enregistrement du produit
Merci d'avoir acheté un produit Acoustic Research. Nous sommes fi ers de la qualité et de la fi abilité de tous nos produits électroniques, mais en cas de nécessité de
réparation ou pour toute question le personnel de notre service clientèle est prêt à vous aider. Contactez-nous sur www.808headphones.com. ENREGISTREMENT
D'ACHAT: Enregistrer votre produit en ligne nous permettra de communiquer avec vous pour tout avis de sécurité au sujet du produit en vertu du Federal Consumer
Safety Act (Loi fédérale de protection du consommateur). Enregistrez votre produit en ligne sur: WWW.808HEADPHONES.COM. Cliquez sur Enregistrement
produit et remplissez le court questionnaire.
EN/E/F
It is important to read this user manual prior to using your new product for the fi rst time.
Es importante leer este manual antes de usar por vez primera su equipo.
Nous vous recommandons de lire ce manuel d'instructions avant d'utiliser votre nouveau produit pour la première fois.
FCC Information
Precautions for the unit
• Do not use the unit immediately
Note:
after transportation from a
This device complies with part 15 of
cold place to a warm place;
the FCC Rules. Operation is subject
condensation problems may result.
to the following two conditions: (1)
• Do not store the unit near fi re,
This device may not cause harmful
places with high temperature or
interference, and (2) this device must
in direct sunlight. Exposure to
accept any interference received,
direct sunlight or extreme heat
including interference that may cause
(such as inside a parked car) may
undesired operation.
cause damage or malfunction.
• Clean the unit with a soft cloth or
This equipment has been tested
a damp chamois leather. Never use
and found to comply with the
solvents.
limits for a Class B digital device,
• The unit must only be opened by
qualifi ed personnel.
pursuant to Part 15 of FCC Rules.
These limits are designed to provide
reasonable protection against
The Bluetooth® word mark and logos
harmful interference in a residential
are registered trademarks owned by
installation. This equipment
Bluetooth SIG, Inc. and any use of
generates, uses, and can radiate
such marks by VOXX Accessories
radio frequency energy and, if not
Corporation is under license. Other
installed and used in accordance with
trademarks and trade names are those
of their respective owners.
the instructions, may cause harmful
Turning On/Off
General controls
Power On : Slide the ON/OFF switch
Top view
to ON at the bottom of the SP880. A
power on beep tone will be heard and
1
2
the PAIR indicator will blink.
Power Off : Slide the ON/OFF switch
to OFF at the bottom of the SP880.
Rear view
4
3
Bottom view
6
guide de l'utilisateur
manual de usuario
SP880SL/SP880BL/SP880RD
interference to radio communications.
Changes or modifi cations not
However, there is no guarantee
expressly approved by VOXX
that interference will not occur
Accessories Corporation could void
in a particular installation. If this
the user's authority to operate the
equipment does cause harmful
equipment.
interference to radio or television
reception, which can be determined
RF Exposure Warning
by turning the equipment off and
This equipment must be installed and
on, the user is encouraged to try to
operated in accordance with provided
correct the interference by one or
instructions and the antenna(s) used
more of the following measures:
for this transmitter must be installed
• Reorient or relocate the receiving
to provide a separation distance of
antenna.
at least 20 cm from all persons and
• Increase the separation between
must not be co-located or operating
the equipment and receiver.
in conjunction with any other
• Connect the equipment into an
antenna or transmitter. End-users
outlet on a circuit different from
and installers must be provide with
that to which the receiver is
antenna installation instructions and
connected.
transmitter operating conditions for
• Consult the dealer or an
satisfying RF exposure compliance.
experienced radio/TV technician
for help.
Pairing
(1) PAIR Button
Pair the SP880 with your phone/device
• Press and hold for 3 seconds to
to create an audio streaming link
activate pairing mode
between the two devices. Your devices
must be paired before music can be
(2) PAIR Indicator
played.
• Fast fl ash: ready for pairing
• Very slow fl ash: in Standby mode
• Slow fl ash: reconnecting to the
Important : Make sure that
most recently connected device
your phone/device supports
• Solid blue: Bluetooth connection
Bluetooth A2DP* (Advanced
established
5
Audio Distribution Profi le) before
proceeding.
(3) LINE IN
*A2DP (Advanced Audio Distribution
• 3.5 mm auxiliary input jack
Profi le) is a technology enabling to
stream stereo sound from an audio
(4) DC IN
source (phone, PC, laptop, tablet,
mp3 player) to a stereo speaker or
(5) Charging Indicator
headset via Bluetooth. To do so, both
• Red : charging
devices must support this profi le.
• Off : battery full
(6) ON/OFF Switch
English
IMPORTANT SAFETY INSTRUCTIONS
user manual
Some of the following information
may not apply to your particular
product; however, as with any
electronic product, precautions should
be observed during handling and use.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near
water.
This device complies with Industry
of Canada licence-exempt standard
RSS 210
Operation is subject to the following
two conditions: (1) This device may
not cause harmful interference,
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation.
IC Radiation Exposure Statement:
This equipment complies with IC
radiation exposure limits set forth for
an uncontrolled environment.
1. If the SP880 is off, slide the ON/
OFF switch to ON.
2. The PAIR Indicator begins
blinking. This indicates that the
SP880 is attempting to reconnect
to a previously paired device.
After a few seconds the PAIR
Indicator begins blinking rapidly.
This indicates that the SP880 is
now ready to pair.
3. While the SP880 is in pairing
mode, select CANZ from the list of
Bluetooth devices of your phone.
4. If your phone asks for a password/
pin code, enter 0000 and press
OK.
5. Upon successful pairing, the SP880
will beep once. It is now ready to
use with your phone.
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE
• Clean only with dry cloth.
product or that is listed in the
• Do not install near any heat
user's guide.
sources such as radiators, heat
• Apparatus shall not be exposed
registers, stoves, or other
to dripping or splashing and no
apparatus (including amplifi ers)
objects fi lled with liquids, such
that produce heat.
as vases, shall be placed on the
• Refer all servicing to qualifi ed
apparatus.
service personnel. Servicing is
• Do not attempt to disassemble
required when the apparatus has
the cabinet. This product does
been damaged in any way, such
not contain customer serviceable
as power-supply cord or plug is
components.
damaged, liquid has been spilled
• The marking information
or objects have fallen into the
is located at the bottom of
apparatus, the apparatus has been
apparatus.
exposed to rain or moisture, does
not operate normally, or has been
Important battery information
dropped.
Warning: Your product contains a
battery and charging system which
ADDITIONAL SAFETY INFORMATION
is designed to work in temperatures
• Do not use unauthorized chargers
that do not exceed 50°C (122°F).
or power adapters. Use only
Leaving this product in a closed
chargers that came with your
automobile or the trunk of an
Charging
Industry Canada Regulatory
1. Connect the supplied USB cable
Information
into the DC IN of the SP880.
Connect the other end of the
CAN ICES-3 (B)/NMB-3 (B)
cable to a USB charging port.
Avis d'Industrie Canada
2. The Charging Indicator will turn
CAN ICES-3 (B)/NMB-3 (B)
red while the unit is charging.
When charging is complete, the
Charging Indicator will turn off.
Reconnecting
Streaming music
When you turn it on, the SP880
Important: The SP880
reconnects automatically with the
needs to be paired with
last paired device. When you leave
your Bluetooth A2DP phone/
the Bluetooth operating range, with
device before you can stream
the SP880 turned ON, it disconnects.
music to the speaker. Please refer
When you come back into the
to the Pairing section for details
Bluetooth operating range, press the
on how to pair with the SP880.
PAIR button to reconnect the last
paired device. The SP880 will beep
once it has been successfully repaired.
1. Go to your phone's music player
and play a track by pressing
Standby
"Play" . If the SP880 is connected,
the music will be heard directly
If your device has not been connected
in the speaker. See your phone
for an extended period of time, it
manual if needed.
will enter standby to preserve battery
2. For adjusting volume and
life. In standby mode, the Pair LED
controling audio playback, please
indicator will blink slowly. From
use the controls on your music
standby, quickly press the PAIR button
to reconnect to the last connected
player directly.
device, or press and hold PAIR to
initiate pairing. The PAIR Indicator
will blink rapidly, and the speaker will
automobile where temperatures may
exceed 50°C may result in permanent
battery damage, fi re, or explosion.
Please remove your product from the
automobile when you exit, do not
place your product in the trunk of
your automobile, and do not leave
your product in any location where
temperatures may exceed 50°C.
Ecology
Your product must be disposed of
properly according to local laws and
regulations. Because this product
contains a battery, the product must
be disposed of separately from the
household waste.
Important:
The battery should be fully
charged prior to fi rst use.
Whenever the battery is fully
discharged, immediately recharge
it (regardless of whether you plan
to use the battery or not) in order
to maximize battery life.
If you plan not to use the battery
for an extended period of
time (one week or longer), we
recommend that you fully charge
the battery. For longer periods
of storage, please recharge the
battery at least once every two
months to maintain the battery in
optimum condition.
Auxiliary source
1. Plug one end of the supplied
audio cable into the LINE IN and
the other end into the output of
your music player.
2. Press "Play" on your music player
to stream music directly via the
SP880.
3. For adjusting volume and
controling audio playback, please
use the controls on your music
player directly.