Hiddenbed Majestic Double 조립 지침 매뉴얼 - 페이지 12

{카테고리_이름} Hiddenbed Majestic Double에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hiddenbed Majestic Double 15 페이지.

Carefully pull mechanism arm downward. Keep fingers away from hook!

Guide mechanism arm to the inner side of tri bearer.

Slowly release mechanism arm and hook it on the tri bearer slot.

Note: Once pins are firmly in slots and mechanism arm is attached to

tri bearer, the metal wire may be tightened on mechanism arm. A Phillips

#1 screwdriver is required if removing or adjusting wire.

Fasten metal legs to sub-assembled leg/shelf using ¼" – 20 X ¾" FH Cap

Screws (K).

Note: Match the labels on the metal legs and side of leg/shelf to ensure

proper location of legs.

Unpack Box 5. Take sub-assembled leg/shelf and align the metal legs to the

pilot holes in the mattress supports on the bed sides.

Fasten with # 8 – 1 ¾" PH screws (J).

Unlock bed and pull downward using handle.

Place mattress in bed opening and secure with Velcro strap.

For added safety and to eliminate excess movement, we recommend you

fasten the bed to the wall using #8 – 3 ½" FH screws (Item G).

Note: ensure case is plumb before fastening to wall

Cover exposed screws with screw caps. Your Hiddenbed is now ready for

use.

ENJOY!