Hiddenbed SPLENDID 조립 지침 매뉴얼 - 페이지 13

{카테고리_이름} Hiddenbed SPLENDID에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hiddenbed SPLENDID 17 페이지.

Put bed heads bearing on desk sides carefully, aligning holes

(see detail in sketch STEP 2) provided for link bushings. In

both sides in turn, place place from outside the link pivot set

into link holes as shown. Slighty displacing or rising the bed

as required to push the link in place.

SLIGHTLY HEAVY - BE CAREFUL

Fix the remaining triangle plates (A7) with link screws to link

pivot. Tighten screws, re-check tightening all screws.

Slide body carefully in order to align plates with bed head

holes. Then standing at rear side of body, introduce trunnion

bushing (A8) with screw. Screw in a few turns, and let loose.

Repeat at the other side. Tighten screws (A8) strongly.

Avoid scratching bed head (11) and

desk side (8) with mech arm (A1).