Hiddenbed SPLENDID 조립 지침 매뉴얼 - 페이지 5
{카테고리_이름} Hiddenbed SPLENDID에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hiddenbed SPLENDID 17 페이지.
페이지 인쇄TO OBTAIN A SAFE AND RELIABLE PERFORMANCE
Make sure that:
Side panels bears on the floor at the same level. A carpet can be placed
beneath both said adjacent bearing sides, but do not place carpet or any
shim beneath on side desk or body side alone.
Stand at the middle of the furniture to make the transformation.
Use a mattress of 20 Kg of a maximum height of 10 inches.
added on the desk, best around 25 Kg and the gas spring in the pin arm
position B. Using this balance settings you will not have to make more
than 100N to transform a Hiddenbed furniture.
Avoid excessive or too asymmetric loads on desk.
While lowering, please verify that bed bottom does not touch things left
on the desk. Things left on the desk cannot exceed 18 inches height. Next
to the rear of the desk there is less height available.
As with a door or a rocking chair, take good care not to trap fingers
between closing parts.
If power or signal cables are to be installed, consult a qualified person.
If the bed does not stay down by itself, lock the locking device.
Ask your retailer for more details.
Use the lock placed at the desk side
to safe use in bed and desk position.
WARNINGS
(!)Like a sliding door or a car door or a bike, you have to
do certain things to enjoy Hiddenbed Safely and
reliably. Pay attention to theses recommendations!
Total weight