Dynamat DynilLit 2038 사양 - 페이지 2

{카테고리_이름} Dynamat DynilLit 2038에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynamat DynilLit 2038 2 페이지. Dense ultra-pliable acoustic barrier

Specifications

Dynil Sound Barrier

Appearance:

Black Flexivinyl Barrier

Color: Charcoal Gray

STC: 28

Mass: 1lb per square foot

Thickness: 0.09 inches

Temperature Range (Resistance):

40 ºF to +220 ºF (-40 ºC to +105 ºC )

Standards:

Meets UL94-V0

Chemical Resistance:

Resistant to water and mineral oils

Installation

Dynil Barrier is designed to be installed during the construction or remodeling of your home.

Wall Installation: Measure the height of your studs. Cut Dynil to this length. On standard wall construction, attach the

54" wide material across four studs (48" across) allowing the material to drape between the studs. (See illustration on

opposite side) On staggered wall construction, weave Dynil in and out between the studs. (See illustation on opposite

side) Fasten to studs with standard staple gun. Attach drywall according to manufacturer's instructions.

Floor Installation: Measure length of room perpendicular to joists. Cut Dynil to this length. Apply before underlayment

installation. The maximum roll length is 25 ft. For floors longer than 25 ft, overlap the material 2". Position the 54" wide

material across 48" of floor joists and fasten with standard staple gun. (See illustration on opposite side) Attach sub-floor

according to manufacturer's instructions.

Ceiling Installation: Measure the length of ceiling along the rafters. For regular ceilings, cut Dynil slightly larger than the

spacing between rafters. Attach Dynil with a standard staple gun between rafters so that it sags 2" from the mounting

points. Finish drywall ceiling according to manufacturer's instructions. (See illustration on opposite side) For resilient

channel or drop ceilings, attach Dynil across the rafters with a standard staple gun so that is sags 0.5" from the mounting

points. Finish drywall or install drop panels according to manufacturer's instructions. (See illustration on opposite side.)

Transmission Loss (dB)

45 dB

40 dB

35 dB

30 dB

25 dB

20 dB

15 dB

10 dB

5 dB

0 dB

0 Hz

500 Hz

1000 Hz 1500 Hz 2000 Hz 2500 Hz 3000 Hz 3500 Hz 4000 Hz 4500 Hz

SOUND BARRIER

Dynil Barrier TL (dB)