DB Drive G7 500.5 사용자 설명서 - 페이지 13

{카테고리_이름} DB Drive G7 500.5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DB Drive G7 500.5 14 페이지. Competition grade

4. TROUBLE SHOOTING

NO SOUND ( NO OUTPUT )

1) Please check all connections, cables' routing, short and voltage at G7 amplifiers

and headunit.

2) Please check external fuses. If any are blown, replace with new one.

3) Please check whether speakers work well. You can test speakers by connecting to another amplifier.

PROTECTION

1) Please check overload, overheat ( thermal ), short, voltage and DC offset.

2) Minimum working impedance for 4 channel amplifiers is 2 ohm stereo or 4 ohm mono

Minimum working impedance for all Class D mono amplifiers is

1 ohm for single unit and 2 ohm for linked operation.

3) If G7 amplifier shuts down due to overheat, Reset by turning off the remote input and

alowing time to cool down.

Please make sure there are no airflow obstructions around G7 amplifiers to prevent

thermal protection.

4) G7 1250.1, G7 2500.1, G7 3500.1, and G7 5000.1 have voltage operation of 8.5V~16V

If Voltage is out of range of above, G7 amplifiers will be protected.

POOR BASS RESPONSE

1) Please check speaker polarities .

WHINING NOISE

1) Engine noise is caused by poor grounding of G7 amplifiers, headunit, other

components, battery or alternator, so please check all grounding connection.