DB Drive WDX5K 사용자 설명서 - 페이지 7
{카테고리_이름} DB Drive WDX5K에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DB Drive WDX5K 8 페이지. Wdx series
페이지 인쇄
Built-in Crossover
( 4 Channel: WDX300.4, WDX400.4, WDX800.4 )
The WDX300.4, WDX400.4 and WDX800.4 amplifier allow you to select the crossover
mode (High-Pass, Full Range or Low Pass / Band Pass) and desired crossover point for
channels 1-2 and 3-4.
For example if you wish to use a 2-way loud speaker on channels 1-2, simply set the
block out any unwanted low frequencies.
If you wish to run a subwoofer on channels 3-4, simply set the crossover switch to LP/BP.
If you wish to run a component midrange on either channels 1-2 or 3-4 set the crossover
switch to LP/BP. Then use both HPF and LPF frequency controls to create the desired
band pass frequency range.
THESE SETTING CAN BE USE ON CHANNELS 1-2 OR 3-4 INDEPENDENTLY OR FOR ALL CHANNELS
LOW LEVEL INPUT
CH 3
CH 1
GAIN
MIN MAX 50Hz 5KHz 50Hz 500Hz
GAIN
MIN MAX
CH 4
CH 2
Adjust HP to desired frequency
Example
HP
Adjust HP to desired frequency
Example
CROSSOVER CONTROLS
CH 1/2
POWER
HPF
LPF
X-OVER
BASS BOOST
HPF
LP/BP
0dB
12dB
FULL
6dB
PROTECT
HPF
LPF
X-OVER
BASS BOOST
REMOTE
50Hz 5KHz
50Hz 500Hz HPF
LP/BP
0dB
12dB
FULL
6dB
CH 3/4
800.4
4 STEREO AMPLIFIER
HP must be set to 50Hz
Adjust LP to desired frequency
Example
LP
Adjust LP to desired frequency
BP
WDX300.4
RATED POWER 14.4 VOLTS @ 4Ω:
4 x 60W
RATED POWER 14.4 VOLTS @ 2Ω:
4 x 120W
RATED POWER 14.4 VOLTS @ 4Ω Bridgeable:
2 x 180W
Frequency Response:
20Hz ~ 22KHz
Damping Factor (1kHz @ 4Ω):
200<
105db
Low Level Input:
6V - 0.280mV
Independent Selectable X-over for F / R:
HPF / LPF /BP
Variable High Pass Filter (12 dB slope):
50Hz ~ 5KHz
Variable Low Pass Filter (12 dB Slope):
50Hz ~ 500Hz
Selectable Bass Boost @ 45Hz:
0-6dB-12dB
Working Voltage:
12 ~ 15 volts
WDX1K
RATED POWER 14.4 VOLTS @ 1Ω:
1 x 1000W
RATED POWER 14.4 VOLTS @ 2Ω:
1 x 500W
RATED POWER 14.4 VOLTS @ 4Ω:
1 x 250W
Frequency Response:
20Hz ~ 250Hz
Damping Factor (1kHz @ 4Ω):
100<
95db
Low Level Input:
7.5V - 0.26mV
Variable Low Pass Filter (12 dB Slope):
50Hz ~ 220Hz
Variable Subsonic Filter (12 dB Slope):
10Hz ~ 50Hz
Selectable Bass Boost @:
45Hz
Included Remote Level Control:
Yes
Working Voltage:
12 ~ 15 volts
WDX3K
RATED POWER 14.4 VOLTS @ 1Ω:
1 x 3000W
RATED POWER 14.4 VOLTS @ 2Ω:
1 x 1500W
RATED POWER 14.4 VOLTS @ 4Ω:
1 x 750W
Frequency Response:
20Hz ~ 250Hz
Damping Factor (1kHz @ 4Ω):
100<
95db
Low Level Input:
7.5V - 0.26mV
Variable Low Pass Filter (12 dB Slope):
50Hz ~ 220Hz
Variable Subsonic Filter (12 dB Slope):
10Hz ~ 50Hz
Selectable Bass Boost @:
45Hz
Included Remote Level Control:
Yes
Working Voltage:
12 ~ 15 volts
Dimensions
Length
WDX300.4
8.66" / 220mm
WDX400.4
13.3" / 337.82mm
WDX800.4
15.75" / 400.05mm
WDX1K
9"/ 228.6mm
WDX2K
12" / 304.8mm
WDX3K
15.24" / 387.09mm
WDX5K
19.69" / 500.126mm
WDX400.4
WDX800.4
4 x 80W
4 x 110W
4 x 160W
4 x 220W
2 x 240W
2 x 330W
20Hz ~ 22KHz
20Hz ~ 22KHz
200<
200<
105db
105db
6V - 0.280mV
6V - 0.280mV
HPF / LPF /BP
HPF / LPF /BP
50Hz ~ 5KHz
50Hz ~ 5KHz
50Hz ~ 500Hz
50Hz ~ 500Hz
0-6dB-12dB
0-6dB-12dB
12 ~ 15 volts
12 ~ 15 volts
WDX2K
1 x 2000W
1 x 1000W
1 x 500W
20Hz ~ 250Hz
100<
95db
7.5V - 0.26mV
50Hz ~ 220Hz
10Hz ~ 50Hz
45Hz
Yes
12 ~ 15 volts
WDX5K
1 x 5000W
1 x 2500W
1 x 1250W
20Hz ~ 250Hz
100<
95db
7.5V - 0.26mV
50Hz ~ 220Hz
10Hz ~ 50Hz
45Hz
Yes
12 ~ 15 volts
Height
Width
2.25" / 57.15mm
6.54" / 166.116mm
2.25" / 57.15mm
6.54" / 166.116mm
2.25" / 57.15mm
6.54" / 166.116mm
2.25" / 57.15mm
6.54" / 166.116mm
2.25" / 57.15mm
6.54" / 166.116mm
2.25" / 57.15mm
6.54" / 166.116mm
2.25" / 57.15mm
6.54" / 166.116mm
12