Hideaway Beds Beta-DIY 조립 지침 매뉴얼 - 페이지 2

{카테고리_이름} Hideaway Beds Beta-DIY에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hideaway Beds Beta-DIY 20 페이지. Wallbed frame and cabinet system

Familiarize yourself with all of the components in the Beta-DIY System, as

well as thoroughly study this manual so you may plan the steps required to

complete the project.

Study all illustrations and plan drawings. Make sure that the space available is

adequate for the specified dimensions of the bed cabinet, both in the open

and closed positions (see cut list pages 5-6 to cross check dimensions).

Panels should be 3/4" (19mm) ply core. Particle board is acceptable but with

more attention given to assembly procedures and handling. This is discussed

further in this manual.

Pull handles to open the bed down are not provided. Select these from your

local decorative hardware supplier. Have them on site at the time of assembly.

Check to be sure that all items are available

Beta D.I.Y. Hardware System

Cabinet Components and Hardware

Necessary Tools

If you choose a horizontal bed orientation, a separate cut list is provided and

assembly diagrams are on page 20.

Prepare all wood cabinet components.

Mount Lift Mechanism.

Install springs in Lift Mechanisms.

Assemble the Bed Cabinet.

Attach Bed Cabinet to wall.

Assemble Bed Face Panel Unit.

Prepare and assemble Cleats and Rails to Bed Face.

Install the Bed Face Panel in Cabinet

Install Handles - Leg Assembly - Mechanism Covers - Mattress

Project Start Up

Steps to Complete Project