Hideaway Beds SwingAway 조립 지침 매뉴얼 - 페이지 2

{카테고리_이름} Hideaway Beds SwingAway에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hideaway Beds SwingAway 10 페이지. Bed
Hideaway Beds SwingAway에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (8 페이지)

페이지 인쇄

SwingAway Vertical Wall Bed Assembly Instructions

The SwingAway (CEVNT) systems are vertically mounted wall beds that stand alone on their own sub-

frame, which must be fixed to the floor and wall. The bed can be mounted in a recess or cabinet using

bi-folding doors, concealed using a curtain etc. or left on view. NOTE: Doors cannot be fixed to the base

of a SwingAway Bed. The counter balanced mechanism is suitable for use with most standard sized

mattresses. Maximum mattress depth is 8".

Important

•

If packaging is damaged, check bed frame for any damages and all components are present. If

any items are missing contact your retailer immediately.

•

Please take time to read these instructions fully before attempting assembly of the SwingAway

wallbed.

•

The SwingAway must be fixed to the floor and wall. Failure to do so could be dangerous!

•

Do not attempt to operate the bed prior to securely fixing in place.

Tools Required

•

5mm & 4mm Allen Key

•

13mm &10mm Spanner

Note: The bolts supplied have square shoulders, which are designed to pull into the round holes in the

frame when tightened.

Component List (See Figs 1, 2 & 3 Attached)

•

1 X Bed Frame (In 2 Pieces) 'A' & 'B'

•

2 X Bed Frame Joining Bars 'C' &'D' (1X Additional Central Bar On Double Beds).

•

2 X Sprung Counterbalanced Units 'E' & 'F'

•

2 X Wall Brackets 'G'

•

2 X Sub-Frames 'H' & 'I'

Note: it is essential that the bed assembly is securely fixed to floor and / or

wall with correct fixings.

horizontal position unless it is fixed and always use the pull handle. Risk of

injury may occur if wall bed is not correctly secured.

Do not try to pull the bed down into the

2 |

P a g e