DynaMetric TMP-636S 지침 - 페이지 3

{카테고리_이름} DynaMetric TMP-636S에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DynaMetric TMP-636S 4 페이지. Telephone transmit & receive patch

Record & Playback Software

You may use DynaMetric Call Saver Pro™ recording software, the recording feature in your web

conferencing application, Windows Sound Recorder, or other audio recording software. Below are

instructions for Windows Sound Recorder. Be sure to read the Feedback section no matter what

software you use. The screens may vary with different Windows™ versions.

Instructions for Windows Sound Recorder

Windows Sound Recorder can be found on your computer, starting at the Start button:

Start button – Programs – Accessories – Entertainment – Sound Recorder

VOLUME CONTROL SETUP –

Open Volume Control by:

Start button – Programs – Accessories – Entertainment –

Volume Control,

or just double click the speaker icon in your system tray.

When you open up the Volume Control, you will see a

screen similar to the one shown to the right. This is the

Playback volume control (the header just says Volume

Control). Put a check in the Microphone Mute box as

shown. Set the output 'Volume Control' (the one on the

left side) and the Wave volume control each to about 1/2

for now.

Now switch over to the Record Volume Control by

selecting the Options menu, then Properties. Click the

Recording button, make sure that the Microphone box is

checked, and click OK.

FOR LEGAL USE ONLY

www.DynaMetric.com

INSTRUCTIONS

TMP-636S Telephone Transmit & Receive Patch

For Use with Sound Card with PC Speakers

This will bring up the Recording Volume control. Make

sure the Microphone box is checked, and set the volume

to near maximum for now.

Page 3 of 4

6-10-05