DynaMetric TRI-804 지침

{카테고리_이름} DynaMetric TRI-804에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DynaMetric TRI-804 2 페이지. Telephone recorder interface audio and handset off when on-hook

페이지 인쇄

DynaMetric

The TRI-804 Telephone Recorder Interface provides clear analog audio of both sides of the

conversation to loggers from almost all digital, electronic or analog telephones that have modular

connected handsets. The TRI-804 detects handset ON/OFF-HOOK with any desk top telephone

set that cradles the handset in cavities in the telephone housing. It can be used on wall mounted

telephones of this type as well as those resting on the desk.

The unit has the following features:

•

Picks up and isolates the full duplex audio from the handset circuits and outputs it to the

recorder on the center pair of the RJ-11 output jack.

•

Mutes handset when ON-HOOK to avoid inadvertent recording of room conversations

between calls. Cut Off Modules not needed for either the "hot handset" or for security

reasons.

An LED on the TRI-804 is lit whenever the handset is OFF-HOOK indicating that both it and

the output to the recorder are activiated.

•

Installation:

Mount the TRI-804 on the side of the telephone base adjacent to the earphone end of the handset

when it is ON-HOOK. Press it lightly in place on the adhesive pad so it can easily be moved if

necessary.

Remove the handset coil cord from base of phone and plug in pigtail from TRI-804 in its place.

Plug cord from power cube into TRI-804 and plug power cube into adjacent 115 VAC outlet. Plug

handset coil cord into TRI-804. Connect recorder to RJ-11 output jack.

Patent # 5,835,585

FOR LEGAL USE ONLY

www.DynaMetric.com

717 SOUTH MYRTLE AVENUE • MONROVIA, CALIFORNIA 91016-3422

626-358-2559 • FAX 626-359-5701 • 800-525-6925

Instructions

TRI-804 Telephone Recorder Interface

Audio and Handset OFF when ON-HOOK

P/N 43420

Page 1 of 2

9-17-01