DB Drive EUPHORIA EDSP4-31BT 사용자 설명서 - 페이지 6

{카테고리_이름} DB Drive EUPHORIA EDSP4-31BT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DB Drive EUPHORIA EDSP4-31BT 15 페이지. 31 band digital sound processor with built-in amplifier

페이지 인쇄

• REM input: While the switch is set to ACC the unit will

turn on when the12V accessory source is connected to

the ACC+ input; When switch is set to HOST and the unit

detects the audio signal from the factory radio outputs

connected to the two high level input lines of FL+/FL- the

unit power will on.

• If you are using RCA Low Level Input while the toggle

switch is set to ACC then use the REM or ACC+ cables to

power on the EDSP4-31BT.

2.3 Low Level RCA input/output Indication

When using the Low Level RCA Input shown as input 2 on

the panel illustrated in Figure 2.2.1:

• The maximun capacity of these inputs is 10V from an

aftermarket radio.

• CH1-2, CH3-4 and CH7-8 outputs will recieve signal

from Low Level RCA input. CH5 and CH6 are null. CH7-8

will function as subwoofer outputs only.

2.4 USB2.0 Port

Figure 2.4.1

For EDSP4-31BT tuning, connect USB cable to computer via

USB USB2.0 Interface for PC Tuning 8 (refer to Figure 1.2.1

in Section 1).

3. Software Operation

3.1 Software Installation

• Computer tuning software is available for download at

euphoriacaraudio.net

• Operating Systems: Windows XP / Vista / WIN7 / WIN8

operating system.

• Download and follow the on-screen prompts to install

software, Once the download is finished, double-click the

installation file to open the application.

3.2 Power OFF/ON

Double-click the EDSP4-31BT application icon while the

USB cable is connected to the powered EDSP4-31BT. The

software application will open the and the main interface

display will appear.

Figure 3.2.1