Celestron PowerSeeker 50 빠른 설정 매뉴얼 - 페이지 2

{카테고리_이름} Celestron PowerSeeker 50에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Celestron PowerSeeker 50 2 페이지. Celestron powerseeker 50: brochure
Celestron PowerSeeker 50에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지), 사양 (4 페이지), 브로셔 및 사양 (4 페이지)

페이지 인쇄

Quick Set-up Guide [cont]

Orient finderscope so that it is facing toward

the front of the tube. Place finderscope over

screws as shown above.

Insert the diagonal into the focuser and tighten

the set screw to secure in place. Remove the

plastic cap on the diagonal.

To observe, look through the telescope as

shown above.

For detailed usage information please consult your owner's manual.

Replace knurled nuts to secure in place and

remove lens covers.

Place the 20mm eyepiece into the barrel of the

diagonal as shown above. Tighten the set

screw to secure in place.

For additional magnification, you can use the

included 3x barlow. Place the barlow in the

diagonal in place of the eypiece and tighten

set screw -- remove the cap from the barlow.

Loosen the set screw on the focuser and

remove the plastic cap.

Before you begin observing, remove the

optical tube cover.

Insert the chrome barrel of the 20mm eyepiece

into the barlow and tighten the set screw to

secure in place.