Celestron PowerSeeker 60AZ 사용 설명서 - 페이지 4
{카테고리_이름} Celestron PowerSeeker 60AZ에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Celestron PowerSeeker 60AZ 9 페이지. Celestron powerseeker 60: quick setup
Celestron PowerSeeker 60AZ에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (2 페이지), 사용 설명서 (10 페이지)
ASSEMBLY
This section covers the assembly instructions for your PowerSeeker telescope. Your
telescope should be set up indoors the first time so that it is easy to identify the
various parts and familiarize yourself with the correct assembly procedure before
attempting it outdoor.
SETTING UP THE TRIPOD
1. Remove the tripod from the box (Figure 2-1). The tripod
comes preassembled so that the set up is very easy.
2. Stand the tripod upright and pull the tripod legs apart
until each leg is fully extended and then push down
slightly on the tripod leg brace (Figure 2-2). The very top
of the tripod is called the tripod head.
3. Next, we will install the tripod accessory tray (Figure 2-3)
onto the tripod leg brace (center of Figure 2-2).
4. On the bottom of the tripod tray is a screw attached to
the center. The screw attaches into a threaded hole in
the center of the tripod leg brace by turning it clockwise.
NOTE: Pull up slightly on the tripod leg brace to
make it easy to attach.
Continue turning the tray until hand tight – don't over
tighten the tray.
5. The tripod is now completely assembled (Figure 2-4).
6. You can extend the tripod legs to the height you desire.
At the lowest level, the height is about 27" (69 cm) and
extends to about 47" (119 cm). You unlock the tripod leg
lock knobs at the bottom of each leg (Figure 2-5) by
turning them counterclockwise and pull the legs out to
the height you want and then lock the knobs securely.
A fully extended tripod looks similar to the image in
Figure 2-6.
7. The tripod will be the most rigid and stable at the
lower heights.
Your PowerSeeker 60AZ telescope comes in one box. The pieces in the box are the
optical tube, altazimuth mount, 20mm eyepiece, 4mm eyepiece, 3x Barlow lens, erect
image diagonal, and a universal smartphone adapter.
Figure 2-1
Figure 2-3
Figure 2-4
Figure 2-5
Figure 2-2
Figure 2-3a
Figure 2-6
3