8BitMods MemCard PRO 사용자 설명서 - 페이지 4

{카테고리_이름} 8BitMods MemCard PRO에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 8BitMods MemCard PRO 15 페이지.

INITIAL SETUP

MemCard PRO requires a formatted microSD card in order to

work. Any microSD card rated Class 4 and above will work,

from 1GB to 2TB. Each gigabyte of storage space amounts to

approximately 8,000 VMCs, each with 15 blocks of storage

space.

To prepare your microSD card, you will need a computer and a

microSD card reader (or a full size SD card reader with a

microSD to SD card adapter).

Download the ofﬁcial "SD Card Formatter" software from the

SD Card Association: https://www.sdcard.org/downloads/

formatter/

Run the formatter and select your SD card. Select "Quick

Format" and give it a "Volume Label" if you'd like. Press the

"Format" button.

You will also require the MemCard PRO latest ﬁrmware and

operating system. You can download the ﬁle from the following

link: https://install.appcenter.ms/orgs/beta-ucu9/apps/

memcardpro/distribution_groups/public

Once you download your ﬁle, extract its contents to the newly-

formatted microSD card. You should have three new items in

the root folder of your card:

• mcu.bin (ﬁle)

• fpga.bin (ﬁle)

• os (folder)

Safely-eject your microSD card from your computer and plug it

into the microSD card slot of your MemCard PRO.

Please Note: if you decide to replace the microSD card on

your MemCard PRO, you will need to repeat the instructions on

this page for the new microSD card.

You can now plug the MemCard PRO in to either slot of your

PlayStation, PSone, or PlayStation 2* console.

*PlayStation 2 support only works for PlayStation 1 games

played on PlayStation 2 consoles. PlayStation 2 Slim consoles

are not supported, as they do not provide enough power to the

MemCard PRO. However, you can do a modiﬁcation to the

console to rectify this. Please contact us for the PS2 Slim

modiﬁcation instructions via email at "[email protected]"

Page 4