DB Elettronica Telecomunicazioni MOZART 150 캘리브레이션 매뉴얼 - 페이지 19

{카테고리_이름} DB Elettronica Telecomunicazioni MOZART 150에 대한 캘리브레이션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DB Elettronica Telecomunicazioni MOZART 150 19 페이지.

i) Switch on the amplifier and go to "[07] Alarms" menu on the display and set the FOLD

BACK REFL and the REFL Warning to 10%.

Fig. 25 – FOLD BACK REFL and REFL WARNING are set to 10%

j) Press RF ON/OFF button on the front panel to enable the RF.

k) Disconnect the 50ohm load from the output of the amplifier. The led WARNING will be

turned on. Check if the FWD power is 10% of "SET Pout". (ex. The FWD power must

be 25W with WARNING turned on because before this we have set the FWD power to

250W. )

Mozart series calibrating procedure

19 /19