Celestron SkyScout Scope 90 빠른 설정 매뉴얼 - 페이지 2

{카테고리_이름} Celestron SkyScout Scope 90에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Celestron SkyScout Scope 90 2 페이지. Celestron telescope instruction manual
Celestron SkyScout Scope 90에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)

페이지 인쇄

Quick Set-up Guide [cont]

Loosen the set screw on the focuser. Remove the

plastic cap covering the end of the focuser.

Slide the finderscope into the dovetail bracket built-in

to the focuser. Secure finderscope with locking screw.

Select an object to locate from the SkyScout's

database.

Look inside the 40mm eyepiece and center the object.

Rotate the pan handle to lock the telescope in place.

WARNING:

without proper filtering!

Insert the diagonal into the focuser and tighten the

set screw.

Hold the SkyScout with the larger targeting window

towards the front end of the telescope. Align the holes

at the bottom of the SkyScout with the alignment pins

on the bracket. Place the holes over the pins and

press the SkyScout down until it is firmly seated on

the bracket.

Rotate the telescope's pan handle counterclockwise

and move the telescope in the direction indicated by

the red targeting arrows.

For detailed usage information please consult

Never attempt to view the sun through any telescope

Insert the chrome barrel of the 40mm eyepiece into

the diagonal and tighten the set screw.

Use the adjustment knobs on the bracket to align the

SkyScout with the telescope's eyepiece. See

instruction manual for complete alignment procedure

Slowly move the telescope until all the targeting

arrows are illuminated.

your owner' s manual.