Celestron TABLETOP 76 31034 매뉴얼 - 페이지 2

{카테고리_이름} Celestron TABLETOP 76 31034에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Celestron TABLETOP 76 31034 9 페이지.

1. INTRODUCTION

Thank you for purchasing this Celestron 76mm (3") Tabletop Telescope. This telescope is a precision

scientific instrument. With it you will enjoy numerous objects in the sky—planets, nebulae, star clusters,

galaxies and other astronomical objects.

The altazimuth mount is the simplest and easiest type of mount to use with two motions  altitude (up and

down) and azimuth (side-to-side).

But, before your journey begins take time to read this manual to familiarize yourself with the operation and

parts of your telescope.

WARNING—NEVER LOOK AT THE SUN WITH YOUR TELESCOPE OR ITS FINDERSCOPE.

PERMANENT AND IRREVERSIBLE EYE DAMAGE MAY RESULT AS WELL AS DAMAGE

TO YOUR TELESCOPE.

2. TELESCOPE ASSEMBLY

Please refer to Figure 1 (and the identifying parts list) as you assemble the telescope.

The telescope and all items are packed in one box. Included are:

Model # 31034

•

Telescope Optical Tube

•

Table Tripod Mount

•

Tripod Legs (3)

•

5x24 Finderscope and Bracket

•

4mm Eyepiece - .96" (150x)

•

20mm Eyepiece - .96" (30x)

•

Barlow Lens - 2x - .96"

A. Remove the telescope tube, table tripod arm and tripod head from the box. These parts are assembled at

the factory:

Take the tripod legs (Q) out of the box. Attach the three tripod legs by threading them clockwise

into the threaded holes in the tripod head (P).

Rubber feet (R) are already installed on the tripod legs to prevent any damage from the metal

tripod legs when set on a table or other flat surface.

B. Mounting the finderscope:

Remove the finderscope assembly (finderscope and bracket) from the box.

The finderscope with bracket (G) mounts in a socket on the telescope tube. Slide the finderscope

bracket into the groove of the socket on the telescope and hold it in place by tightening the

thumbscrew (J) firmly.