Celestron TrailSeeker 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Celestron TrailSeeker에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Celestron TrailSeeker 12 페이지. Binocular

SETTING THE DIOPTER / FOCUSING

To ensure a crisp, sharp image the focusing

system of the binocular must be set to

compensate for any differences in your eyesight.

This is achieved by setting the diopter (located

on the right eyepiece) before use. To set the

binocular to your eyesight follow the instructions

below.

1. View an object in the distance through the

binocular.

2. Cover the right objective lens with your hand

or the objective lens cap.

3. Rotate the focus wheel until the image

viewed with your left eye is clear and sharp.

4. Cover the left objective lens with your hand

or objective lens cap.

5. Viewing the same object, adjust the diopter

ring until the image viewed with your right

eye is clear and sharp.

I ENGLISH

6. Your binocular is now adjusted to your eyes

and focusing on any object can now be

achieved by simply turning the focus wheel.

TIP:

Eyeglasses worn for nearsightedness should be worn when using

binoculars as you may not be able to obtain focus at inﬁnity without

them.

Diopter

Adjustment Ring

Focus

Wheel

Fig 3