Celestron Travel Scope 70 빠른 설정 매뉴얼 - 페이지 4

{카테고리_이름} Celestron Travel Scope 70에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Celestron Travel Scope 70 8 페이지. Up to 40x magnification full-height tripod with altazimuth mount
Celestron Travel Scope 70에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지)

페이지 인쇄

ALIGNING THE

FINDERSCOPE

The finder is one of the most important parts of your telescope. It

helps you locate objects and center them in the eyepiece. The first

time you assemble your telescope, you need to align the finder to

the telescope's main optics. It's best to do this during the day*.

* SOLAR WARNING!

Never attempt to view the Sun through any

telescope without a proper solar fi lter

CHOOSE A TARGET

Take the telescope outside during the day and find

an easily recognizable object, like a streetlight,

license plate or sign. The object should be as far

away as possible, but at least a quarter mile away.

ADJUST THE FINDERSCOPE

Without moving the telescope, use the three finger

knobs on the finderscope bracket to move the finder

around in the bracket until the crosshair appears

over the same object you are observing in the

telescope's 20mm eyepiece.

TIP:

Try adjusting one screw at a time. Loosen one screw by half

a turn and tighten another by the same amount to ensure the

fi nderscope is securely held in place.

Focus Knobs

CENTER THE TARGET

IN THE EYEPIECE

Look through the telescope using your lower

powered eyepiece. Move the telescope until the

object you chose lies in the center of the view. If the

image is blurry, gently turn the focus knobs until it

comes into sharp focus.

YOUR FINDERSCOPE IS

NOW ALIGNED!

It should not require realignment unless it is bumped

or dropped.

Low Power Eyepiece

LOOK THROUGH FINDERSCOPE

Once the object is centered in your 20mm eyepiece,

look through the finderscope and locate the

crosshair reticle.