Gainward GeForce Series 빠른 시작 매뉴얼 - 페이지 5

{카테고리_이름} Gainward GeForce Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gainward GeForce Series 14 페이지. Geforce series
Gainward GeForce Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (20 페이지)

페이지 인쇄

1. Quick Start Manual

Display configurations

Single CRT monitor or LCD monitor with

VGA connector

Single CRT monitor or LCD monitor with

DVI-I connector with DVI-VGA converter

VGA connector

Single LCD monitor (DVI port)

DVI-I connector

CRT monitor + LCD monitor (DVI port)

VGA connector + DVI-I connector

HDMI display device + LCD monitor (DVI

HDMI connector + DVI-I connector

port)

HDMI display device + LCD monitor with

HDMI connector + VGA connector

VGA connector

Note #1

To proper use the HDMI display device you just connect the HDMI cable (it will come with your HDMI display

device) to the HDMI connector of the Gainward HDMI display adapter.

Some Gainward display adapter needs to connect SPDIF signal for the HDMI audio. You can simply use the

SPDIF internal cable (white/red-SPDIF signal, black-GND) connect your mother board＇s SPDIF output pin

header (please reference the user's manual of the mother board) with the internal SPDIF connector, the small

connector in WHITE (AUDIO IN) on the component side, of the Gainward HDMI display adapter.

(Internal SPDIF cable)

Quick Start Manual

Connector

Note

Note #1

Quick Start Manual

Step 3: Software Installation

Note:

To make sure the system reliability we strongly recommend you to remove the old display driver that system had

installed for the old display adapter.

1. Turn your computer and monitor on and boot the operating system. The operating system (Windows Vista/XP)

will attempt to detect your new Gainward display adapter, and then try to install the drivers that it can find.

Since these drivers are usually much older, and very generic, you will not be able to benefit from many of the

adapter's advanced features and enhanced performance. It is therefore recommended to manually select a

driver. Please select "Standard PCI Display Adapter (VGA)" as your display adapter, and reboot the system

when you are asked.

2. When your operating system is running a "Standard PCI Display Adapter (VGA)" driver, you may insert the

Gainward UTILITY DISC. This CD-ROM has an auto-start feature. The installation software will detect the

version of your operating system and it will then install all necessary drivers and utility programs. Just sit back

and relax as the software installation may take a few moments.