Automationdirect.com Productivity 1000 P1-4ADL2DAL-1 매뉴얼 - 페이지 2
{카테고리_이름} Automationdirect.com Productivity 1000 P1-4ADL2DAL-1에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Automationdirect.com Productivity 1000 P1-4ADL2DAL-1 8 페이지. Analog input/output
페이지 인쇄
Input Specifications
Inputs per Module
Module Signal Input Range
Signal Resolution
Resolution Value of LSB
(least significant bit)
Data Range
Input Type
Maximum Continuous Overload
Input Impedance
Filter Characteristics
Sample Duration Time
All Channel Update Rate
Open Circuit Detection Time
Conversion Method
Accuracy vs. Temperature
Maximum Inaccuracy
Linearity Error (end to end)
Input Stability and Repeatability
Maximum Full Scale Calibration
Error
Offset Calibration Error
Maximum Crosstalk at DC,
50Hz and 60Hz
Recommended Fuse (external)
External Power Supply Required
2
www.productivity1000.com
4
0–20 mA
13-bit
0–20 mA = 2.44 µA per count
(1LSB = 1 count)
0–8191 counts
Sinking, Single-ended (1 common)
±31mA
247:, ±0.5%, 1/4W Current Input
Low Pass, -3dB @ 120Hz
4ms per channel
(does not include ladder scan time)
20ms
Zero reading within 100ms
Successive approximation
±75PPM / ºC maximum
0.5% of range
(including temperature drift)
±0.037% of range
Monotonic with no missing codes
±0.024% of range (after 10 minute warm-up)
±0.098% of range
±0.098% of range
±0.049% of range
Edison S500-32-R, 0.032 A fuse
24VDC (-20% / + 25%), 140mA (Loop Power
Included)
Output Specifications
Outputs per Module
Output Range
Signal Resolution
Resolution Value of LSB
(least significant bit)
Data Range
Output Type
Output Value in Fault Mode
Load Impedance
Maximum Inductive Load
Allowed Load Type
Maximum Inaccuracy
Full Scale Calibration Error
Offset Calibration Error
Accuracy vs. Temperature
Max Crosstalk at DC, 50Hz and
60Hz
Linearity Error (End to End)
Output Stability and
Repeatability
Output Ripple
Output Settling Time
All Channel Update Rate
Maximum Continuous Overload
Type of Output Protection
Output Signal at Power Up and
Power Down
Tech Support 770-844-4200
2
4–20 mA
12-bit
4–20 mA = 3.9 µA / count
1 LSB = 1 count
0–4095 counts
Current sourcing at 20mA max
Less than 4mA
0–570 : (19.2 VDC), 0–690 : (21.6 VDC),
0–810 : (24.0 VDC), 0–930 : (26.4 VDC),
0–1100 : (30.0 VDC)
Minimum Load: 0: @ 0–45 °C
125: @ 45–60 °C ambient temperature
1mH
Grounded
1% of range
±0.2% of range minimum
±0.2% of range maximum
±75 PPM / °C maximum full-scale
calibration change (±0.005% of range / °C)
-72dB, 1 LSB
±4 counts max., (±0.1% of full scale)
±2% counts after 10 min. warm up (typical)
±0.2% of full scale
0.3 ms max., 5µs min. (full scale range)
4ms (max)
Outputs open circuit protected
Electronically current limited to 20mA or less
4mA